Monday, 26 January 2015

Interesting Experiments

Making
Soda-Powered Battery
  1. Pour the contents of a soda can into a plastic cup.


                    

   2. Cut a strip of aluminum from the soda can.

  • The strip should be long enough to dip into the soda and extend slightly past the rim of the cup.
  • Instead of cutting the can, you may purchase aluminum strips from a hardware retailer.



    3. Sand the aluminum strip (optional).

  • Only do this if you cut a strip from the soda can.
  • Use sandpaper to complete this task.
  • This will remove any paint and plastic coating from the aluminum.



    4. Clip a strip of aluminum and a strip of copper to the edge of the plastic cup.

  • Copper strips can be purchased from a hardware retailer.
  • Use alligator clips, which can be purchased from an electronics retailer.
  • Do not let the alligator clips touch the soda.
  • The strips should dip into the soda and extend slightly past the rim of the cup.



5. Test the battery.

  • Use a voltage meter, which can be purchased from an electronics retailer.
  • Connect a clip lead from each metal strip to the voltage meter. Clip leads can also be purchased at an electronics retailer.
  • Follow the instructions that come with the voltage meter.
  • The battery should produce approximately 3/4 of a volt.





Making
Salt-Powered Battery

1. Fill most of a plastic cup with water.


2. Add 1 tablespoon (14.79 ml) of salt to the water.


3. Clip a strip of aluminum and a strip of zinc to the edge of the plastic cup.
  • Aluminum and zinc strips can be purchased from a hardware retailer.
  • Use alligator clips, which can be purchased from an electronics retailer.
  • Do not let the alligator clips touch the liquid.
  • The strips should dip into the liquid and extend slightly past the rim of the cup.



4. Test the battery.
  • Use a voltage meter, which can be purchased from an electronics retailer.
  • Attach a clip lead to each metal strip. Clip leads can also be purchased from an electronics retailer.
  • Follow the instructions that come with the voltage meter.
  • The battery should produce approximately 3/4 of a volt.



No comments:

Post a Comment